The Sun Tunnel allows natural sunlight to come through your attic and light up your whole room! Any room can be redecorated with natural light in two hours. Click on any of the rooms below to view a before and after picture with the Sun Tunnel or visit the Sun Tunnel web site at www.velux.com

Click here if you're done browsing and want to place an order.

DW106/DW106K/DW100
Heavy-Duty 3/8" (10mm) VSR Drill
5.4Amps; 0-2,500 rpm
All ball-bearing construction provides greater durability. Contoured textured handle for better grip. Built-in two-way level for drilling accurate vertical and horizontal holes. DW106/DW106K: Heavy-duty Jacobs keyless chuck provides greater bit retention.
DW106K Includes: Kit box
DW100 also available in 220V
$75 + Shipping and Handling
Click here if you're done browsing and want to place an order.

DW248/DW246/DW245
Heavy-Duty 1/2" (13mm) VSR Drill
7.8 Amps; 0-600 rpm
Helical-cut steel, heat-treated gears for smooth operation
Metal gear housing for increased durability
Rubber grip and two-finger rubber trigger for increased comfort
360 side handle for greater control
DW248/DW246: Jacobs keyless chuck with spindle lock provides greater holding power
DW248: Anti-Lock Control (ALC) electronic control system
$149 + Shipping and Handling
Click here if you're done browsing and want to place an order.

DW991K-2/DW991KQ-2/DW991B
Heavy-Duty 14.4V 3/8" (10mm)
Adjustable Clutch Drill/Driver Kit
Powered by DeWALT's 14.4V "system" of battery packs
334 inch lbs. of torque - the industry's most powerful 14.4V
DeWALT-built high-performance motor with fan cooling delivers maximum power and durability. Variable speed, reversing; 0-450/0-1,450 rpm. DW991K-2 & DW991KQ-2 Include: 2 XR PACK extended run-time batteries, screwdriver bit and kit box; DW991KQ-2 includes: 15-minute charger; DW991K-2 includes: 1-Hour charger. DWW991B Includes: XR PACK extened run-time battery and screwdriver bit
$229 + Shipping and Handling
Click here if you're done browsing and want to place an order.

DW610/DW612
Heavy-Duty 1-1/2" HP Router
9.0 Amps
Rack and pinion depth adjustment for quick, accurate setup
All-metal housing, metal fan and 100% ball bearings provide superior durability
Accepts standard template guide bushing with no special adaptors
Dw612 is the motor unit for DW610
DW610 Includes: 1/4" and 1/2" collets and 2 wrenches
$159 + Shipping and Handling
Click here if you're done browsing and want to place an order.

DW321/DW321K
Heavy-Duty Top Handle Jig Saw
5.8 Amp motor moves blade at 500-3,100 spm
4-position orbital action. Keyless blade change system accepts universal and t-shank blades. Unique counter-balance mechanism and rubber grip provide smooth operation
Adjustable shoe slides forward, backward and bevels 45' in both directions without tools. Variable speed trigger
100% ball-bearing consrtuction. Dust blower keeps line of cut clear of clips. DW321K Includes: 3 assorted cobalt steel blades and kit box
$169 + Shipping and Handling
Click here if you're done browsing and want to place an order.

DW362/DW362K
Heavy-Duty 7-1/4" (184mm) Circular Saw with Electric Brake
15.0Amps
High-strength, low- friction aluminum alloy shoe
Lightweight: 10.9 lbs. Two-second electric brake.
100% ball and roller bearings
50' bevel capacity. Shoe provides a 1-1/2" edge distance that matches dimensional lumber thickness. 20-tooth carbide blade.
DW362K Includes: Blade, wrench and kit box
DW362 Includes: Blade and wrench
$135 + Shipping and Handling
Click here if you're done browsing and want to place an order.

DW705/DW704
Heavy-Duty 12" (305mm) Compound Miter Saw
13.0 Amps 4,000 rpm
Bevels 0-45' to the left with the ability to bevel to 48'
Fence slides out of the way to handle bevel cuts
0-48' miter (left and right) for greater verstility cutting angles
Extra-tall sliding fence allows 5-1/4" crown molding to be cut standing vertically. Esay-to-read stainless-steel miter scale with nine positive stops for ease and accuracy. Lightweight (38.0 lbs.) with built-in carry handle for easy portability. Electric brake
Includes: 32-tooth SERIES 20 carbide blade (DW3123) and blade wrench
DW705 also available in 220V
DW704: Non-compund heavy-duty 12" (305mm) miter saw
$329 + Shipping and Handling
Click here if you're done browsing and want to place an order.

RoboVector
The Instant 100' Plumb Bob, Level and Square
RoboVector is a 5-beam, all-in-one square, plumb bob and level that's no bigger than a tape measure. It's one tool that puts an end to carpenter square, levels and plumb bobs... making every mark faster, easier and more accurate. Its Gravity-driven pendulum is constantly self-leveling, so marks start, and stay, true. Set it and forget it. RoboVector attaches anywhere, to anything, by using the included mounting accessory:
Magnet locks on steel studs; strapor clamp to pipes, door jambs and walls; screws to walls and studs; adapts to 5/8" x 11 tripods.
RoboVector's exclusive diamond cut beam splitter is a single piece that guarantees perpendicularity of 5 beams and preserves accuracy over time. Other multi-beam products use mirror designs requiring complex assembly operations which often create inaccuracies.
$250 + Shipping and Handling
Click here if you're done browsing and want to place an order.

RoboLaser
The Instant 200' Level
Job sites are hardly ever on the level. Which is why every job site needs a RoboLaser-- it uses gravity to constantly self-level so there is no fussing with inaccurate bubble vials. Simply place the RoboLaser on any surface and its patented self-leveling pendulum does the rest. Just set it and forget it. RoboLaser is like a giant 200' level that well save up to 75% of the time spent doing layouts. It delivers flawlessly consistent readings accurate to 1/8" at 100'!
Its powerful laser beam is easy to see indoors and out, and remote-controlled, so you can use it alone. RoboLaser's built-in level sensor will immediately begin to blink the laser if the unit is out of level. If the unit is bumped or disturbed or goes out level for any reason, the user will know right away.
$350 + Shipping and Handling
Click here if you're done browsing and want to place an order.

RoboTape
The Instant 300' Tape Measure
RoboTape is like putting a 300' tape measure in your hand- one that's accurate to 1/8". RoboTape's laser locks on target first time, every time - unlike ultra-sonic technology that is prone to false readings due to interference from obstacles. Point. Click. Calculate. Using anything less is guesswork.
Measure from 1' to 300' with absolute confidence. Ultra-sonic devices can't compare. RoboTape works in two modes: Exact, which measures the distance to an exact target, or Trace, which finds the specific distance from a target.
It automatically adds, subtracts, calculates area and volume, triangulates and stores up to 1000 measurements. Calculation measurements can be taken from RoboTape's front, back, corner extension (measure diagonals) or from a tripod mount.
$600 + Shipping and Handling
Click here if you're done browsing and want to place an order.

33-445
Heavy Duty PowerLock Tape Rules

Heavy-duty spring, blade and hook system
13% thicker blade for longer stand out
Heavier and stronger spring for long life
3 rivet corrosion-resistant hook
Improved blade readability with high contrast color- easy to read in all light conditions
Impact-resistant, safety yellow case
Heavy-duty Mylar* "blanket-wrap" coating extends blade life up to ten times longer!
$16.99 + Shipping and Handling
Click here if you're done browsing and want to place an order.

66-565
6 Piece Rubber Grip Screwdriver Set

Full size rubber grip
Boron steel blade
Tips fully cross ground for more secure fit
Chrome plated for corrosion resistance

$18.50 + Shipping and Handling
Click here if you're done browsing and want to place an order.

93-310
Ergonomically Designed BoardBender
Designed by builders to straighten deck and joist boards faster and easier. Extra heavy-duty, 5/8" high carbon steel bar for extra strength and durability. Cushioned handle designed for kneeling to maintain pressure ---frees both hands for nailing. Saves time, money and material.
Patent pending.

$43.50 + Shipping and Handling
Click here if you're done browsing and want to place an order.

12-920
Block Plane

Cast iron bottom and sides are grounded perfectly flat and true
Micro-adjustable mouth opening"
Precision ground cutter is replaceable

$43 + Shipping and Handling
Click here if you're done browsing and want to place an order.

58-930
Ergonomically Designed Cushioned Grip Nail Sets

Cushioned grip is designed for a non-slip grip in all weather conditions.
Shock absorbing ribbed grip for precision hold.
25% longer length makes it easy to set nails in hidden and "hard-to-reach" areas. Color coded by tip size makes it easy to locate.
Full-hardened; precision-milled steel for extra long life.
Designed by and for the pro. Patent pending

$8.25 + Shipping and Handling
Click here if you're done browsing and want to place an order.

Level any ladder in seconds (even on stairs) with the PiViT Laddder Tool!
Whether you work on ladders once a year or every day, you can work safer and work more efficiently with the PiViT Ladder Tool! PiViT Ladder Tool is easy and simple to use. It's portable! No bolts! No clamps! Changing from ladder to ladder is a snap. PiViT Ladder Tool helps you quickly and easily handle those very unusual jobs. You can level a roof in no time flat! PiViT Ladder Tool has eleven functions, is completely adjustable yet has no moving parts. Can also work with the RoofBoot!

Check out some pictures of the PiViT Ladder Tool in action:
Steep slope - Steep roofs - Step stool -
Ladder jack - Paint tray holder - Paint can

$79.99 + Shipping & Handling
Click here if you're done browsing and want to place an order.

Solatube’s revolutionary, award-winning skylights set the standard. No others work as brilliantly, efficiently, or reliably. Their dedication to the utmost quality, design and manufacturing makes the difference.
Features include:

Light Intercepting Transfer Device (LITD™) Raybender™ Technology Spectralight 2000™ Seamless Flashings Quick and Easy Installation Compact and Adjustable Tubing Energy-Efficient Excellent Color Rendition Flashings Ten Year Product Warranty

10" Solatube - $253 + S&H         14" Solatube - $403 + S&H
Click here if you're done browsing and want to place an order.

 

 

 

 

 

COMING SOON...

Get even more from you PiViT Ladder Tool with the RoofBoot!
Use RoofBoot with your PiViT Ladder Tool on roofs steeper than 7/12 pitch (Up to 7/12 pitch, RoofBoot not required on asphalt shingle roof). Easily secure your ladder on steep roofs with the help of RoofBoot. Sold in pairs, the RoofBoot is an excellent tool for the roofer when used to secure toe boards. Use two PiViT Ladder Tools with two RoofBoots to build a working platform.

Check out these pictures of the RoofBoot in action:
Attaches to PiViT - Secures ladders - Make a working platform

$41 + Shipping & Handling
Click here if you're done browsing and want to place an order.

 

 

 

8.99 + Shipping and Handling
Click here if you're done browsing and want to place an order

 

 

 

 

 

 

 

 

 

 

COMING SOON...